Samsung U28E850R

89
Setup and Reset
6
6 Setup and Reset
6.4 USB Super Charging
Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
 Super charging is available via [ ] and [ ] ports. Use these ports to charge devices
faster than using a normal USB port. The charging speed may vary, depending on the connected
device.
 Quick battery charging may not be supported and/or charging may take more time on some
mobile devices.
 When super charging is turned off for [ ] and [ ] ports, use these ports for regular
speed charging and data transfer.
 If a USB 2.0 or lower device is connected to the [] or [] port and super charging is
turned on, data transfer is impossible, but it is possible if a USB 3.0 device is connected.
※ These ports may not be compatible with new USB devices that may be released in the future.
 If a device, such as a mouse, keyboard or memory storage device, is connected to the [ ] or
[ ] port and the device is USB 2.0 or lower, turn off super charging.
 If super charging is turned on using the OSD settings menu, all devices connected to USB ports 1
through 4 on the monitor are re-recognized. This ensures optimum charging.
※ Before turning on super charging, close all files on storage devices connected to USB ports.
6.4.1 Configuring USB Super Charging
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to System and press [ ] on the product.
3 Press [ ] to move to USB Super Charging and press [ ] on the product.
4 Press [ ] to move to USB1 or USB2 and press [ ] on the product.
The following screen will appear.
1 2
1 2
1
2
1
2