94
Setup and Reset
6
6 Setup and Reset
6.7 Source Detection
You can activate Source Detection.
Not available when PIP/PBP Mode is set to On.
6.7.1 Configuring Source Detection
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to System and press [ ] on the product.
3 Press [ ] to move to Source Detection and press [ ] on the product.
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
Off
Off
1.2
Auto
Decide how input
sources will be
detected.
FreeSync
Smart Eco Saving
Off Timer Plus
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
System
Auto
Manual
To Next Page
Loading...
