95
Setup and Reset
6
6 Setup and Reset
6.8 Key Repeat Time
Control the response rate of a button when the button is pressed.
6.8.1 Configuring Key Repeat Time
1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to System and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
Configure the
response rate of a
button when the button
is pressed.
Key Repeat Time
Reset All
System
Acceleration
1 sec
2 sec
No Repeat
To Next Page
Loading...
