25
What is NCE (Natural Color Expert)?
The Natural Color Expert (hereinafter "NCE") program was developed by
Samsung Electronics to display optimized colors customized by users.
―
This product supports the monitor calibration feature through the internal
NCE function and the provided NCE program. (a calibrator can be purchased
separately).
―
The default calibration settings measured at the factory can be restored after
the product is calibrated using the NCE software.
―
Note that the default calibration settings measured at the factory may vary
depending on the panel characteristics. Panel characteristics can change
according to operating time.
NCE Program Installation/Uninstallation
Installation
1
Insert the installation CD into the CD-ROM drive.
2
Click the Natural Color Expert V4 installation program.
―
If the software installation screen does not pop up on the main screen, go to CD-ROM
AutoPlay Manual NCE
folder. Next, install using the Natural Color Expert v4 execution file.
3
If the Natural Color Expert V4 InstallShield Wizard screen appears, click Next and Install in sequence.
4
Installation progress will be displayed.
5
Click Finish in the displayed InstallShield Wizard Complete screen.
6
The Natural Color Expert V4 shortcut icon will be created on the desktop after installation.
―
The Natural Color Expert V4 execution icon may not be displayed depending on the PC system or product specifications.
―
Press the F5 key (Refresh) if the execution icon does not appear.
Uninstallation
1
Go to Settings Control Panel on the Start menu and double-click Add or Remove Programs.
2
Select Natural Color Expert V4 from the list and click Change/Remove.
―
Natural Color Expert V4 installation can be affected by the graphics card, mother board and network conditions.
To Next Page
Loading...
