34
Connecting and Using a Source Device
Chapter 04
Before Connecting
Check the following before you connect this product with other devices.
Pre-connection Checkpoints
―
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
―
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
―
Check the types of ports at the back of the product you want to connect.
―
To maximize the picture quality, a graphics card that supports the UHD
(3840x2160) resolution is recommended.
Connecting and Using a PC
Select a connection method suitable for your PC.
―
Connecting parts may differ in different products.
Connection using a Dual-link DVI cable
―
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
DVI IN
1
Connect the DVI cable to the DVI IN port on the back of the product and the DVI port on the PC.
2
Press to change the input source to DVI.
―
Audio is not available if the PC and product are connected via the DVI port.
―
UHD resolution (3840x2160 @ 30Hz) is available if a dual-link DVI cable is connected.
To Next Page
Loading...
