Samsung U32D970 - Displayport Ver; Configuring Displayport Ver

73
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2
supports High Bit Rate 2.
▶
▶
▶
▶
Eco Saving
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
O Timer
Settings
Select your Displayport.
Displayport 1.1
supports HBR 1, while
1.2 supports HBR 2.
O
Auto
Acceleration
설정
에코 세이빙
PC/AV 모드
입력 인식
키반복 시간설정
꺼짐 예약
모두 초기화
해제
▶
자동
가속반복
▶
해제
최소
최대
1.2
1.2
DisplayPort Ver.
DisplayPort1
DisplayPort2
1.1
1.2
Select your Displayport.
Displayport 1.1
supports HBR 1, while
1.2 supports HBR 2.
-
The displayed image may differ depending on the model.
―
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
―
If the monitor (when set to DisplayPort1 or DisplayPort2) is in power saving mode or is displaying the message Check
Signal Cable, press the
button to display the On Screen Display (OSD). You can select 1.1 or 1.2.
Conguring DisplayPort Ver.
1
Press any button on the front of the product to display the Function Key Guide. Next, press to display the
corresponding menu screen.
2
Press to move to Settings and press on the product.
3
Press to move to DisplayPort Ver. and press on the product.
•
1.1 / 1.2
4
Press to move to the option you want and press .
5
The selected option will be applied.