Samsung U32D970 - Configuring Image Size

64
Conguring Image Size
PIP Mode
In PC mode
스크린
화면 크기
수평 위치
수직 위치
동시 화면 모드
와이드
3
3
▶
PIP/PBP
PIP/PBP Mode
Size
Position
Sound Source
Source
Image Size
Contrast&Color
On
HDMI
Auto
Wide
Select the image size for
each screen.
In AV mode
스크린
화면 크기
수평 위치
수직 위치
동시 화면 모드
와이드
3
3
▶
PIP/PBP
PIP/PBP Mode
Size
Position
Sound Source
Source
Image Size
Contrast&Color
On
HDMI
4:3
16:9
Screen Fit
Select the image size for
each screen.
-
The displayed image may differ depending on the model.
Select the image size for sub-screen.
1
Press any button on the front of the product to display the Function Key Guide. Next, press to display the
corresponding menu screen.
2
Press to move to Screen and press on the product.
3
Press to move to PIP/PBP and press on the product.
4
Press to move to Image Size and press on the product.
(available in PIP mode(Size / / ))
In PC mode
•
Auto: Display the picture according to the aspect ratio of the each screen input source.
•
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In AV mode
•
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
•
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
-
A digital output device is connected using the DVI/HDMI/DP cable.
-
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
these signals.).
-
This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV.
5
Press to move to the option you want and press .
6
The selected option will be applied.