Samsung U32D970 - Page 63

63
(available in PBP mode(Size ))
Source
DisplayPort1 DisplayPort2
Apply
Cancel
-
The displayed image may differ depending on the model.
Select input sources for the devices displayed on the main and sub screens.
1
Press any button on the front of the product to display the Function Key Guide. Next, press to display the
corresponding menu screen.
2
Press to move to Screen and press on the product.
3
Press to move to PIP/PBP and press on the product.
4
Press to move to Source and press on the product.
•
DisplayPort1 / DisplayPort2 / HDMI / DVI
5
Use and / to select input sources for the left and right screens.
6
Press to move to Apply and press on the product. The selected option will be applied.
Pressing when Cancel is selected will clear the Source settings and display the PIP/PBP control menu page.
―
The screen may flicker if the input signal is unstable.
―
When the input signal of the left and right screens are the same, the operation cannot be performed.
―
If the function button description page appears, press
. The select input source menu will appear.