30
4
Configure the Black Level setting. If you do not adjust the black level setting by moving the slider
button, the minimum brightness will automatically be applied.
5
Configure the color temperature for White Point (range: 4000K – 10000K). To select a standard
brightness, click the Standard button.
6
Configure the R/G/B Gamma settings. If you configure LUT, the gamma curve of sRGB will be
applied.
•
If Linear Gray is selected, DeltaE (color difference) for the gray scale changes to less than 1 after
calibration.
•
If Deep Black is selected, the black luminance becomes darker than Linear Gray after calibration.
The minimum brightness varies depending on the “Black Level” settings.
To Next Page
Loading...
