Samsung WA400 Series - Quick Test Mode

ALIGNMENT AND ADJUSTMENTS
4
TEST MODE
Test Mode:
EachTestModeisasfollowsinthecomingpages.
Thetestmodesaremodesunabletogetan
accessoncethewashingcyclehasstarteddueto
safetyresons.
Quick Test Mode
Denition of Quick Test Mode:
- CheckoperationofallLED’s(VerifyfaultyLED).
- Checkmodelandsoftwareversion.
- Checkdierentoperatingmodes(e.g.watervalve,motor,door,drainpump,etc.).
How to Enter:
- Plugintheunit.
- PressSpinkey,SoillevelkeyandPowerKeyatthesameTime.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
WA422*/WA400*
TECH MANUAL_DC68-03132A-03_EN.indd 4 2013-5-27 9:46:20