What to do if my Samsung WA400 Washer leaks water?
If your Samsung Washer is leaking water, make sure all hose connections are tight and that the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high efficiency detergent to prevent excessive suds.
What does Foaming Detected mean on my Samsung WA400?
If your Samsung Washer displays 'Foaming Detected', it means the washer has detected too much foam. This is a normal operation to prevent non-sensing faults.
What to do if the door will not unlock on my Samsung WA400 Washer?
To resolve a door that will not unlock on your Samsung Washer, ensure the lid is firmly closed. If it still doesn't unlock, push the Power button to turn off your washer, then turn it on again.
How to resolve a temperature sensor error on a Samsung WA400 Washer?
If your Samsung Washer displays a temperature sensor error, there may be an issue with the washing heater in the tub. Resolve the contact error or temperature sensor fault.
How to fix MEMS error on Samsung WA400?
A MEMS error on your Samsung Washer indicates that the output from the MEMS sensor is over 4.5V or under 0.5V. Check the MEMS sensor.
Why is my Samsung WA400 vibrating or too noisy?
If your Samsung Washer is vibrating excessively or is too noisy, make sure it is placed on a level surface and is not in contact with any surrounding objects. Also, ensure that the laundry load inside is balanced.
What to do if my Samsung Washer does not drain and/or spin?
If your Samsung Washer isn't draining and/or spinning, start by checking the fuse or resetting the circuit breaker. Ensure the drain hoses are straightened to allow proper water flow. Also, make sure the lid is closed, and press the Start/Pause button to initiate the draining and spinning process.
Why does my Samsung WA400 keep stopping?
If your Samsung Washer stops mid-cycle, first ensure it's plugged into a working electrical outlet and check the fuse or circuit breaker. Then, close the lid and press the Start/Pause button. Note that some cycles include a pause or soak period, so allow some time to see if it resumes. Finally, inspect the inlet hose screens for any obstructions.
How to fix Samsung WA400 that will not start?
First, ensure the lid of your Samsung Washer is fully closed. Next, confirm that the washer is properly plugged into a working electrical outlet. Also, check that the water source faucets are completely open. Press the Start/Pause button to initiate the wash cycle. Verify that the Child Lock feature is deactivated. Lastly, inspect the fuse or reset the circuit breaker.
Why does my Samsung WA400 show an unbalance error?
If your Samsung Washer displays an unbalance error, it is likely due to the laundry load. Find the reason for the imbalance and solve it as directed in the user manual.
Details on Large Capacity, AquaJet™, Digital Inverter Motor, Mist Shower, and VRT® technologies.
Explanation of Eco Plus, Pure Cycle™, My Cycle, and Smart Care functionalities.
Essential guidelines and precautions for safe operation.
Explanation of warning symbols and their meanings for user safety.
Steps for unpacking the washer and identifying its main parts.
Guidelines for selecting a proper location and necessary electrical/water requirements.
Details on drain facility, flooring, location clearances, and dimensions.
Instructions for connecting water supply hoses and the drain hose.
Steps for leveling the washer and running the calibration mode.
Guidance on loading laundry and initiating the wash cycle.
Explanation of the washer's control panel layout and indicators.
Details on Child Lock, My Cycle, and Delay Start features.
Description of various wash cycles, pre-soak, AquaJet™, Eco Plus, and Smart Care.
Guidance on using detergents, bleach, and fabric softener with the dispenser.
Instructions for cleaning the external surfaces and the internal drum.
Procedures for cleaning the detergent dispenser and using the Pure Cycle™.
Troubleshooting common issues like no start, no water, or noise.
Understanding diagnostic codes displayed by the washer.
Reference charts for fabric care symbols and wash cycle settings.
Details on limited warranty coverage for U.S.A. and Canada.
To Next Page
General