To Next Page
J
Jennifer RamirezAug 28, 2025
What to do if unbalanced load prevented my Samsung WA400 from spinning?
- CcharrisAug 28, 2025
Redistribute the load in your Samsung Washer and press the Start/Pause button.
What to do if unbalanced load prevented my Samsung WA400 from spinning?
Redistribute the load in your Samsung Washer and press the Start/Pause button.
What to do if my Samsung WA400 is not draining?
To address a Samsung Washer that is not draining, turn the unit off and then on again. Select only the Spin Cycle and press the Start/Pause button to drain the water.
What to do if the door will not unlock on my Samsung WA400 Washer?
To resolve a door that will not unlock on your Samsung Washer, ensure the lid is firmly closed. If it still doesn't unlock, push the Power button to turn off your washer, then turn it on again.
How to fix a Samsung WA400 that will not start?
If your Samsung Washer isn't starting, try these solutions: Ensure the lid is fully closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause button. Also, verify that Child Lock is not activated. Check the fuse or reset the circuit breaker. Note that before filling, the washer clicks to check the lid lock and perform a quick drain.
What to do if my Samsung WA400 Washer leaks water?
If your Samsung Washer is leaking water, make sure all hose connections are tight and that the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high efficiency detergent to prevent excessive suds.
What to do if my Samsung WA400 is leaking water?
If your Samsung Washer is leaking water, it could be due to a couple of reasons. First, check the connections of the air hose, as leakage can occur during the spin cycle if it's out of place. Second, ensure the connecting hose to the detergent drawer is correctly connected. In both cases, check the connections.
How do I get rid of excessive suds in my Samsung WA400 Washer?
To prevent excessive suds in your Samsung Washer, use high efficiency detergent. Reduce the detergent amount for soft water, small, or lightly soiled loads. Non-HE detergent is NOT recommended.
How do I fix an unbalanced load on my Samsung WA400?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load, then press the Start/Pause button.
What to do if my Samsung WA400 has no water or not enough water?
To resolve water not filling or insufficient water in your Samsung Washer, begin by ensuring both faucets are fully turned on. Next, straighten any kinks in the water inlet hoses. If the issue persists, the hose filter screens may be clogged; disconnect the hoses and clean the screens.
Why is my laundry load too wet at the end of the Samsung Washer cycle?
If clothes are too wet after a cycle in your Samsung Washer, select the High spin speed option. Also, try using high-efficiency detergent to reduce excessive suds. Note that very small loads can sometimes cause this issue.
Details on Large Capacity, AquaJet™, Digital Inverter Motor, Mist Shower, and VRT® technologies.
Explanation of Eco Plus, Pure Cycle™, My Cycle, and Smart Care functionalities.
Essential guidelines and precautions for safe operation.
Explanation of warning symbols and their meanings for user safety.
Steps for unpacking the washer and identifying its main parts.
Guidelines for selecting a proper location and necessary electrical/water requirements.
Details on drain facility, flooring, location clearances, and dimensions.
Instructions for connecting water supply hoses and the drain hose.
Steps for leveling the washer and running the calibration mode.
Guidance on loading laundry and initiating the wash cycle.
Explanation of the washer's control panel layout and indicators.
Details on Child Lock, My Cycle, and Delay Start features.
Description of various wash cycles, pre-soak, AquaJet™, Eco Plus, and Smart Care.
Guidance on using detergents, bleach, and fabric softener with the dispenser.
Instructions for cleaning the external surfaces and the internal drum.
Procedures for cleaning the detergent dispenser and using the Pure Cycle™.
Troubleshooting common issues like no start, no water, or noise.
Understanding diagnostic codes displayed by the washer.
Reference charts for fabric care symbols and wash cycle settings.
Details on limited warranty coverage for U.S.A. and Canada.
General