Samsung WA40A3005AW/A4 - Page 13

Disassembly and Reassembly _ 11
Part Figure Description
Sub and Main PCB
6. Pull and lift up the cover PCB(m).
7. Separate the cover PCB(m) and the wires
connected to the main PBA.
Afterreassemblingthehousing,checkif
thewiresareproperlyconnected.When
disassemblingandreassemblingthe
housing,takecarethatyoudonotdamage
thepart.
8. Pull the PCB (s).
9.

Water Valve
1. After separating the control panel, separate the
water-valve housing.
 
Guide water
 
2. Separate the guide water.
Whenreassemblingtheguidewater,take
carethatyoudonotdamagetheguidewater
xinghook.