Samsung WA40A3005AW/A4 - Troubleshooting; Control Panel and Functionality

18 _ Troubleshooting
01
02
06
03 04
05
4. TROUBLESHOOTING
4-1. INSTRUCTION OF FUNCTION
01 Cycle Selector Turn the Cycle Selector to select the desired cycle. The indicator by the cycle name lights up.
02 Display 
03 Temp.
Press the button repeatedly to cycle through the different water temperature options.
Hot-Whites and heavily soiled, colorfast items.
Warm- Colorfast items.
EcoWarm-
Cool- Brightly colored, very lightly soiled items.
Cold- Cold water with no warm water added.
NOTE

ExtraRinse: Change from spray rinse mode to deep rinse mode, and rinse once again.
Press and hold Temp. for 3 seconds.
04 Water Level

SpinOnly: This cycle runs a spin cycle only. Press and hold Water Level for 3 seconds.
05 POWER
Press once to turn your washer on. Press again to turn your washer off. If the washer is left on for more than
10 minutes without any buttons being pressed, the power automatically turns off.
06 START/PAUSE Press to pause and restart cycles.
■ Control Panel