Samsung WA40A3005AW/A4 - Disassembly Procedures

10 _ Disassembly and Reassembly
3-2. STANDARD DISASSEMBLY DRAWINGS
▶ This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part Figure Description
Sub and Main PCB
(continued)
1. Remove the 6 screws holding the control panel
assembly and separate cover panel.
 
3. Separate the cover panel upward.
 Ifitisdifculttodisassemble,usethe(-)
drivertodisassemblehooks.
(Becarefuldamageofhooks.)
4. Remove the 2 screws holding the control panel
assembly and turn the panel over.
5. Pull the Encoder-Knob to separate it and then

WhenreassemblingthePCB,takecarethat
youdonotdamagethecontrol-panelxing
hook.AfterreplacingthesubPCB,checkthe
keyoperation.