Troubleshooting _ 21
4-3. DIAGNOSTIC CODE & CORRECTIVE ACTION
No
Check Code
(Diagnostic code Image)
Description Corrective Action
1
Lid is open when
washer is running.
door.
necessary.
2
Communication code
between SUB PBA
and MAIN PBA.
the sub and main PBAs.
moisture.
3
properly.
continually pressed.
too tight. If they are fastened too tight, loosen them a little.
replace the main PBA.
the connections, replace the main PBA.
4
The Water Level
properly.
incorrect part is used, an abnormal operation may occur.
(Abnormal operation)
replace the PBA.
5
Your Washer has tried
-
cessful.
-
-
measure.
frozen.
6
Your Washer has tried
reached the proper
water level.
Bellows, for natural draining, remove the alien substance.
7 Mid LED Flash
A fault is detected
in the water level
sensor.
To Next Page
Loading...
