22 _ Troubleshooting
No
Check Code
(Diagnostic code Image)
Description Corrective Action
8 Low LED Flash
Your washer is not
draining. It can also
mean that the unit
senses a small clog
while draining.
pump motor.
tub water temperature is high, replace the pump.
remove the frozen water referring to the relevant repair
procedures.
9
Unbalanced load pre-
vented your Washer
from spinning.
unbalanced.
-
the problem comprehensively, if necessary.
10
Motor not running
properly.
substance.
11
Mems sensor is not
-
nection code or PBA silver nano part malfunction.
12
13
door.
necessary.
14
Thermistor is not
15
The temperature of
the supplied
water is so high.
Ensure that the cold water tap and the hot
water tap are connected correctly. If the code reappears, call
for service.
To Next Page
Loading...
