18 _Disassembly and Reassembly
No. Part name Description Figure
04 WATER LE-
VER SENSOR
1. Separate the assy top-
cover.
2. Disconnect the wire
between the pressure
hose and the water
level sensor for repair or
replacement.
05 DOOR HINGE 1. Remove the 2 screws
holding the door hinge
and separate the door.
2. Remove the 11 screws
holding the holder glass,
separate the holder
glass and replace the
hinge.
WATER VALVE
NOISE FILTER
SENSOR PRESSURE
To Next Page
Loading...
