Samsung WD106UHSA SERIES - Page 21

Disassembly and Reassembly_19
No. Part name Description Figure
06 DOOR LOCK
S/W
1. Open the door. Remove
the wire diaphragm and
remove it from the front
frame.
For easier
disassembly, remove the
spring from the lower
part of the diaphragm
with a (-) screwdriver.
Since the diaphragm
can be damaged when
removing it, remove
it slowly along one
direction.
2. Remove the 2 screws
xed the door lock
switch.
3. Remove the door
lock switch. Remove
the connection wire.
(Remove the connector
after releasing it by
pressing the catch.)