32 _Disassembly and Reassembly
No.
Part
name
Description Figure
14 WEIGHT
BLANCE
1. Separate the screws xed the
weight-balance(f).
Before assembly, make
sure the nut bracket installed
in the tub corresponding posi-
tion correctly.
2. Separate the weight-
balance(f).
For disassembly, please
make sure assembled the
bracket-nut into the tub rst.
Make sure the hole and
hole respond to each other
correctly.
There is no ringt and left
direction for weight-balance(f).
To Next Page
Loading...
