Samsung WD906U4SA Series - Installation Steps

16_ setting up your washing machine
setting up your washing
machine
STEP 2

Before installing the washing machine, you must remove all shipping bolts from the back of the
unit.
1. Loosenalltheboltswiththesuppliedwrench.
2. Hold the bolt with the spanner and pull it through the wide
sectionofthehole.Repeatforeachbolt.
3. Fill the holes with the supplied plastic covers.
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
Packagingmaterialscanbedangeroustochildren;keepallpackagingmaterial(plastic
bags,polystyrene,etc.)welloutofthereachofchildren.
Insertthecapxer,(oneoftheaccessories
inthevinylpack),intotheholefromwhich
you removed the power cord at the back
of the product.




WD906U4SAGD-03223L_EN(EU).indd 16 2013-3-29 12:02:16