Samsung WD906U4SA Series - Drain Only Function; My Cycle

26_ washing a load of laundry

Whenyouwantjustdrainwaterfromwashingmachine,followdirectionsbelow.
1. Press the  button.
2. TurntheCycleSelectortotheSpinposition.
3. Press the buttonrepeatedlyuntil“Nospin( )”lightcomeson.
4. Press the  button.

Allowsyoutoactivateyourcustomwash(temperature,spin,soillevel,etc.)withonebutton
convenience.
By pushing the My Cyclebutton,presstheMyCyclebuttontoloadandusethesavedMy
Cycleoptions.Thechosencourseandoptionlightswillicker.
YoucansetalloptionsasfollowsintheMyCyclemode.
1. Turn the water supply on.
2. Press the Power button.
3. Select cycle using the Cycle Selector.
4. After cycle selection, set each option.
Seethe“CycleChart”onpage41foravailableoptionsettingswitheachcycle.
5. You can then store the selected cycle and options by pressing and holding the My Cycle
buttonforlongerthan3secondsinMyCyclemode.Thecycleandoptionsyouselectwillbe
displayedthenexttimeyouchoosetheMyCyclefunction.
YoucanchangetheMyCyclesettingsbyrepeatingthesameprocessabove.
ThelastusedsettingwillbedisplayedthenexttimeyouchoosetheMyCyclefunction.
IfyoupressMyCycleandreleaseitwithin3seconds,thepreviouslysavedcourseand
optionsappear.IfyoupressandholdMyCyclefor3secondorlonger,thecurrentlyset
courseandoptionsaresavedandtheLEDblinksfor3seconds.
washing a load of laundry
WD906U4SAGD-03223L_EN(EU).indd 26 2013-3-29 12:02:26