Samsung WD906U4SA Series - Washing Clothes Using the Cycle Selector

30_ washing a load of laundry

Yournewwashingmachinemakeswashingclotheseasy,usingSamsung’s“FuzzyControl”
automaticcontrolsystem.Whenyouselectawashprogram,themachinewillsetthecorrect
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Loadthearticlesoneatatimelooselyintothedrum,withoutoverllingit.
5. Closethedoor.
6. Adddetergent,softener,andpre-washdetergent(ifnecessary)intotheappropriate
compartments.
Pre-washisonlyavailablewhenselectingtheCotton,Synthetics,DailyWash,Babycare,
SuperEcoWash cycles.Itisonlynecessaryifyourclothingisheavilysoiled.
7.
Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton,Synthetics,DailyWash,15’QuickWash, BabyCare,SuperEcoWash,OutdoorCare,
Wool.Therelevantindicatorswillilluminateonthecontrolpanel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.

Within5minutesofstartingawash,itispossibletoadd/removelaundryitems.
1. Press the Start/Pause button to unlock the door.
ThedoorcannotbeopenedwhenthewateristooHOTorthewaterlevelistooHIGH.
2. After closing the door, press the Start/Pause button to restart the wash.

After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Removelaundry.
washing a load of laundry
WD906U4SAGD-03223L_EN(EU).indd 30 2013-3-29 12:02:27