Samsung WD906U4SA Series - Detergent Drawer and Storage Preparation

cleaning and maintaining your washing machine _37
03 cleaning and maintaining

1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Removethesoftenerdividerandtheliquid
detergentbox(option)fromthedetergent
drawer.
3. Washallpartsunderrunningwater.
4. Cleanthedrawerrecesswithanoldtoothbrush.
5. Replacethesoftenerdividerandtheliquiddetergentbox
(option)bypushingitrmlyintothedrawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.

You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gentlypulloutthemeshlterfromtheendofthehoseusingapairofpliersandrinseitunder
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.



WD906U4SAGD-03223L_EN(EU).indd 37 2013-3-29 12:02:32