Samsung WD906U4SA Series - Troubleshooting and Information Codes; Common Problems and Solutions

troubleshooting and information codes _39
04 troubleshooting
troubleshooting and
information codes

PROBLEM SOLUTION
 • Make sure your washing machine is plugged in.
• Make sure the door is firmly closed.
• Makesurethewatersourcetap(s)areturnedon.
• Make sure to press the Start/Pause button.


• Turn the water tap on fully.
• Make sure the water source hose is not frozen.
• Straighten the water intake hoses.
• Cleanthelteronthewaterintakehose.



• Make sure your washing machine is running with sufficient water
pressure.
• Make sure the detergent is added to the center of the detergent
drawer.
 • Makesureyourwashingmachineisonalevelsurface.Ifthesurface
is not level, adjust the washing machine feet to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure your washing machine is not touching any other object.
• Make sure the laundry load is balanced.


• Straighten the drain hose. Eliminate kinked hoses.
• Make sure the debris filter is not clogged.


• Thedoorwillnotopenuntil3minutesafterthemachinestopsorthe
power turns off.
Iftheproblempersists,contactyourlocalSamsungCustomerService.
WD906U4SAGD-03223L_EN(EU).indd 39 2013-3-29 12:02:32