Samwontech TEMP2000 Series - 9 Alarm Signal; Alarm Signal Setting

To Next Page

To Previous Page

SAMWONTECH

2nd Edition of TEMP2000_Series IM : July. 16. 2010 Page 61 / 87

9. ALARM SIGNAL

9.1 Alarm Signal Setting

9.1.1 Alarm Signal Setup Screen-1

① Set Alarm Operation.

☞ Run : Alarm operates only during Run State.

☞ Always : Alarm operates regardless of Run/Stop Status.

② Move to next or previous screen.

Table 9-1 Alarm Signal Setup Screen-1 Parameter

Parameter Range Unit Default

Alarm Operation Run, Always ABS Always

①

②

[Figure 9-1] Alarm Signal Setup Screen-1

Other manuals for Samwontech TEMP2000 Series