CW-3000 USER MANUAL
2
<1> INTRODUCTION
CW-3000 Series is professional cooling machine referring to international
advanced thermolysis cooling system design, suitable for small
water-cooled cooling devices requested machinery.
1. Specific disconnection alarm security protection.
2. Hermetic type water tank, water is available for a long time used.
3. Real-time temperature monitoring, accurate knowledge of heating devices
working condition.
4. Professional air-cooled forced radiator with strong heat dissipating
capacity and difficult to be blocked up.
5. Equipped with alarm output port to protect sensitive components quickly.
6. High cost performance, low failure rate.
7. There are several options of power supply, complete in specifications.
<2> CAUTION
1. It is strictly forbidden to plug and run the cooler without feeding water.
2. Cooler should be placed in a well-ventilated, dry environment place and
away from heat sources. Please keep at least 30cm from obstructions to the
air outlet which is in the back of the cooler, and should leave at least 10cm
between obstructions and air inlets of two sides.
3. The cooling water must be drained if the cooler is out of use for long time or
before being transported.
4. To protect laser tubes , the radiator fan of cooler will suspend to work when
water temperature is lower ( about 10℃ ) , and it will restart to run when
water temperature rises to higher ( about 20 ℃).
To Next Page
Loading...
