<4> Operation status and parameters
adjustment
Default setting of T-506B new model intelligent temperature controller is Intelligent
temperature mode ,water temperature is setting 25℃, customer could adjust the
temperature according to requirement. 1.Temperature controller panel introduction
(1). Indicators of temperature controller working status:
COMP ON, compressor working
SV ON, solenoid valve working
Heating ON, heating rod working
INT Ctrl ON, controller working in intelligent control mode
CT Ctrl ON, controller working in constant temperature control mode
PARAM Set ON, controller working in parameters setting mode
ALM OUT ON, alarm output status
Room Temp ON, displaying room temperature
ST DLA ON, starting up delay status
(2). Press key to show the room temperature, 6 seconds later default
display restored. (Meanwhile, Room Temp light is on, displaying room
temperature.)
(3). keys are for modifying parameters values and keys
are for switching parameter items.
(4). RST key: confirm
(5). SET key: setting function
To Next Page
Loading...
