EasyManuals Logo
Home>S&C>Docking Station>IntelliRupter PulseCloser SDA-4650R2

S&C IntelliRupter PulseCloser SDA-4650R2 User Manual

S&C IntelliRupter PulseCloser SDA-4650R2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Sheet 766-557
S&C IntelliRupter
®
PulseCloser
®
Fault Interrupter
Outdoor Distribution (15.5 kV, 27 kV, and 38 kV)
July 31, 2017
©
S&C Electric Company 2013-2017, all rights reserved.
Docking Station Instructions
Table of Contents
Section Page Section Page
Introduction
Qualified Persons ............................. 2
Read this Instruction Sheet ...................... 2
Retain this Instruction Sheet ..................... 2
Special Warranty Provisions ..................... 2
Safety Information
Understanding Safety-Alert Messages ............. 3
Following Safety Instructions ..................... 3
Replacement Instructions and Labels .............. 3
Overview ..................................... 4
Setup .........................................5
Establishing Wi-Fi Connection ..................7
Serial Connection with a Docking Station .......11
Serial Connection—Rev. 3.4.x and Earlier
Connect with IntelliLink® Setup Software ...........12
Reloading Firmware with Download Utility ..........13
Verification of Correct Operation .................16
Serial Connection—Rev. 3.5.x and Later
Connect with IntelliLink Setup Software ............17
Reloading Firmware with Download Utility ..........19
Verification of Correct Operation .................21
Shutting Down. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
BMM Revisions for the Docking Station ........23

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the S&C IntelliRupter PulseCloser SDA-4650R2 and is the answer not in the manual?

S&C IntelliRupter PulseCloser SDA-4650R2 Specifications

General IconGeneral
BrandS&C
ModelIntelliRupter PulseCloser SDA-4650R2
CategoryDocking Station
LanguageEnglish