18 S&C Instruction Sheet 681-530
Accessing the Overcurrent Control with a Web Browser
The software for the overcurrent control is resident on the control and can be accessed
using a Web browser. (See the “Computer Requirements” section on page 10 for compatible
Web browsers and operating systems.) After connecting to the control by connecting to
the USB port, access the control by opening the Web browser.
Microsoft Internet Explorer may perform better when running in Compatibility mode.
If encountering unexpected behavior with Internet Explorer version 8 through 11, please
change to Compatibility mode or contact S&C Technical Support.
STEP 1. Click on the Gear icon. (Or the Tools menu in Microsoft 8 through 10.) From the
drop down menu, click on the Compatibility View settings item. See Figure 12.
Compatibility Mode
and Microsoft Internet
Explorer
Figure 12. Choose “Compatibility View settings” from
the Gear menu. (Microsoft Explorer 11 shown.)
To Next Page
Loading...
