S&C Instruction Sheet 681-530 53
Table 8. Trip Outputs●
Terminal Number (1,2) Pole Mating-Connector Part Number
1, 2 Fault Interrupter 1, Phase A Phoenix 1783999
3, 4 Fault Interrupter 1, Phase B
5, 6 Fault Interrupter 1, Phase C
7, 8 Fault Interrupter 2, Phase A Phoenix 1876194
9, 10 Fault Interrupter 2, Phase B
11, 12 Fault Interrupter 2, Phase C
● Trip contacts are polarized.
External Connections
This section describes each of the external connections to the control. Included in the
following tables are terminal numbers, terminal names, and mating-connector part
numbers (where applicable.) Terminal numbers are identi ed by labels on the electronics
module or terminal block.
Trip Outputs
Electronics
module
Trip
outputs
Figure 43. The Trip outputs.
To Next Page
Loading...
