24 S&C Instruction Sheet 681-530
STEP 4.
Enter a new password, an alpha-numeric sequence of a minimum of 4 characters
and a maximum of 12 characters with at least 1 letter, 1 number and 1 special
character: !, #, $, *, _ or – into the New Password eld. Passwords are case
sensitive. Re-enter the new password in the Con rm Password e l d .
STEP 5. Click on the Save button. A message that the password has been saved
successfully will open. See Figure 22.
STEP 3. If desired, click on the Eye icon to on the right side of the Current Password
eld to reveal the text of the password. See Figure 21.
Logging In for the First Time
Eye icon
Figure 21. Click on the Eye icon to reveal the password.
Figure 22. Click on the Save button. A confirmation message will display.
NOTICE
The overcurrent control will logout the user after five minutes of inactivity. Any
settings not saved before the inactivity logout will be lost.
To Next Page
Loading...
