8
Device Settings
You can alter the Device Settings for an ibi device through the following two
applications:
▪ Ibi Mobile App
▪ Ibi.com Web App
ibi Mobile App
▪ Modifying Device Name
▪ Firmware Version
▪ Reboot Device
▪ Erase All Data & All Users
▪ Remote Shut Down
Modifying Device Name
An ibi device selects a default name for itself. The name can be modified by following
these steps:
1. Access the ibi mobile app.
2. Tap the Settings icon on the right side of the bottom menu bar.
3. Tap the name listed under CURRENT DEVICE.
4. After the Device page opens, Tap the Name option.
a. This will place a blinking cursor at the end of the the device name.
5. Modify the ibi device name.
6. After modifying the device name, Tap the back arrow (<) at the top of the
Device page. This will open the Settings page.
7. Your new device name should now be visible under the section Current
Device.
Firmware Version
To view the
firmware version of the ibi device, follow these steps:
1. Access the ibi mobile app.
2. Tap the Settings icon on the right side of the bottom menu bar.
3. Tap the name listed under CURRENT DEVICE.
4. The Firmware version is listed with a series of numbers that may appear
similar to: 4.0.1-613.
5. You have successfully viewed the
firmware version for your ibi device.
Reboot Device
To reboot an ibi device through the ibi mobile app, follow these steps:
1. Access the ibi mobile app.
2. Tap the Settings icon on the right side of the bottom menu bar.
3. Tap the name listed under CURRENT DEVICE.
4. Go to the bottom of the Device Settings.
Device Settings
ibi
User Manual
19
To Next Page
Loading...
Need help?
General