Ordering Information and Technical Support
SanDisk SDP3B FlashDisk Product Manual © 1998 SANDISK CORPORATION 101
Ordering Information
To order SanDisk products directly from SanDisk, call 408-542-0595.
SDP3B SanDisk FlashDisk Series
Model SDP3BX-YY-ZZZ-DD
Where: X: I Industrial temperature grade
Standard
YY: 2 2.01 MB (Type II)
4 4.03 MB (Type II)
6 6.02 MB (Type II)
8 8.02 MB (Type II)
10 10.48 MB (Type II)
20 20.97 MB (Type II)
40 41.94 MB (Type II)
60 60.16 MB (Type II)
85 85.19 MB (Type II)
110 110.10 MB (Type III)
175 175.37 MB (Type III)
220 220.20 MB (Type III)
ZZZ: 101 Standard
390 Type II high capacity. To order Type II 110, 175 or 220 MB, use part
number SDP3B-XXX-390 where XXX is capacity.
DD: 00 Standard
S1 With Protective Sleeve
SanDisk FlashDisk Evaluation Kit
The SanDisk SDP3B FlashDisk Series is a
solid-state mass storage system that is fully
compatible with the PCMCIA ATA protocol for
mass storage on a memory card. SanDisk SDP3B
FlashDisks support both PCMCIA Rev. 2.1 and
PCMCIA Rev. 1.0 standards.
The FlashDisk Evaluation Kit (Model SDPEV-1)
permits designers to quickly and easily evaluate
the SanDisk SDP3B FlashDisk solid-state mass
storage card using a desktop PC.
The SDP3B FlashDisk Evaluation Kit (Model
SDPEV-1) includes the following items:
Hardware
• Evaluation adapter board
• FlashDisk, one unit
• Card extender
• IDE-AB7 adapter board
Software
• FlashDisk Driver and Utilities diskette
Documentation
• Read Me First flyer
• FlashDisk Evaluation Kit User’s Guide
• FlashDisk product manual
• Pre-Erase Command Application Note
Model SDPEV-1
To order, or for more information call:
408-542-0595
To Next Page
Loading...
