Sandstrom SDABXRL13 User Manual

14
Bluetooth
Bluetooth Search indicator
• Activate Bluetooth on the source.
If the source is a mobile phone or tablet,
Bluetooth will normally be activated in the
connectivity section of the settings menu.
If the source is a computer, Bluetooth settings
should be found in the Control Panel.
• In the Bluetooth menu of the source,
there should be an option to search for
Bluetooth devices. Select this option.
The source will now scan for other Bluetooth
devices and should  nd the radio, identi ed
as ‘SDABXRL13’.
• Choose to pair with this.
If the device features Bluetooth technology
earlier than V2.0, you will be asked for a
password.
• If so, enter 0000.
Your Bluetooth source will now be connected
to the radio. Once connection has been
established, the Bluetooth Connected
indicator will be displayed.
After pairing for the  rst time, the radio will
appear in the connection menu of your
Bluetooth device.
The radio pairing memory can include up to 8
devices. If a further device is then paired, the
oldest in memory will be deleted.
Re-connecting
Your source and the radio should
automatically re-connect when Bluetooth
mode is next selected if no other device
has been connected to the radio.
Playing the Source
Once a source has been paired to your
radio you can play music or movies
through your radio. You can also listen to
your phone calls.
• Select the music, movie etc from your
phone/tablet/laptop and set it to play.
• Turn up the volume on the source.
• Set the volume from your radio in the
normal way.
Playback Control
Once your source is playing you can
control some of the functions from your
radio.
• Press /, to pause the source.
• Press /, again to re-start play.
• Press } to skip to the next track.
• Press { to skip to the previous track.
If you have a mobile source that does
not feature Bluetooth connectivity, you
can still connect it by cable to the AUX
In socket.
You can connect a mobile phone, tablet,
laptop or other Bluetooth equipped source
to play through your radio.
Pairing a Bluetooth Source
Before playing your mobile source it must
be paired and connected to your radio.
• Switch on the radio.
• Press MODE repeatedly until ‘Bluetooth
Mode’ is displayed.
The Bluetooth Search indicator will  ash.
Not all Bluetooth sources will include
Playback Control features. In this case,
select tracks etc using the controls on
the source.
SDABXRL13_IB.indd 14 08/04/2013 10:30

Sandstrom SDABXRL13 Specifications

General

Brand	Sandstrom
Model	SDABXRL13
Category	Radio
Language	English