Sandstrom SDABXRL13 User Manual

18
DAB Mode Menu Functions
These menu functions are only available
when the radio is set to DAB mode.
Station List
• Select this option to display the DAB
station list.
Full Scan
You can perform a full scan at any time to
scan for new DAB stations. The stations will
be added to your station list.
• Select the ‘Full Scan’ option from the
menu.
The scan will take a few minutes. While the
scan is running, the scan progress will be
shown on a bargraph and the number of
stations found will be displayed.
Number of stations found
Scan progress
When the scan nishes, the radio will play
the rst station in the sequence.
Manual Scan
This function is for advanced users only -
stations are selected from the station list.
Manual scan enables you to tune to each
multiplex channel, check if a multiplex is
present and measure the signal strength.
• Select the ‘Manual Scan’ option from
the menu.
The display will switch to read multiplex
channel number and frequency.
• Turn the SCROLL/SELECT dial to scroll
through the channel numbers.
• Press the SCROLL/SELECT dial to tune
to the displayed channel number.
If there is a multiplex on this channel, the
multiplex name will be shown.
A signal strength bargraph will be displayed.
• Turn the SCROLL/SELECT dial to step to
another multiplex number.
DRC (Dynamic Range
Control)
DRC will compress the sound, making
quiet sounds slightly louder. Enable DRC
when listening at very low levels or when
listening in a noisy room.
• Select the ‘DRC’ option from the menu.
• Choose from ‘O’, ‘High’ or ‘Low’.
Prune
The Prune function enables you to delete
all unavailable stations from the Station List.
• Select the ‘Prune’ option from the menu.
• Select ‘Yes’ to go ahead.
All unavailable stations will be deleted.
• Select ‘No’ to exit and leave the Station
List unchanged.
SDABXRL13_IB.indd 18 08/04/2013 10:30

Sandstrom SDABXRL13 Specifications

General

Brand	Sandstrom
Model	SDABXRL13
Category	Radio
Language	English