14
Power Source
Your unit can be mains powered or battery powered. We recommend for
prolonged use to use the mains power.
1. Fully extend the aerial before plugging the unit into the mains.
2. Connecting the unit to any other power source may damage the unit.
Unwind the mains adapter cable to its full length. Connect the end of
the cable to the DC IN 12V
1A Socket at the rear of the unit and then
connect the mains adapter to the mains socket. Make sure the mains
adapter is rmly inserted into the mains socket. The unit is now ready
to use.
Ensure all connections are connected before connecting to the
mains power socket.
12V 1A
Extend the aerial before switching to DAB mode for the rst time.
This will ensure that the initial scan captures all stations in your
area.
SL-DBTB_C_G18_IB_Final190610V2.indd 14 10/06/2019 11:51
To Next Page
Loading...
Need help?
General
