26
FM Operation
Press MODE to select FM radio.
Auto Scan
While listening to an FM station, press SCROLL & SELECT dial to perform
auto scan. Once a station has been found, the scanning will stop
automatically.
Manual Tune
To tune FM frequency manually, turn SCROLL & SELECT dial until your
desired frequency is reached.
Each turn will adjust the frequency by 0.05MHz. If reception is still
poor, adjust the position of the DAB/FM aerial or try moving the
radio to another location.
Scan Setting
In the SCAN SETTINGS menu you can choose if you want your radio to
tune to ONLY the strong stations or select NO and it will try to tune to all
stations, however some may be very weak.
1. In FM mode, press MENU to display the FM menu.
2. Turn SCROLL & SELECT dial to select Scan setting and then press
SCROLL & SELECT dial to conrm.
You’ll now be asked if you want to scan for strong stations only or not.
3. Turn SCROLL & SELECT dial to select Strong stations only or All
stations, and then press SCROLL & SELECT dial to conrm.
SL-DBTB_C_G18_IB_Final190610V2.indd 26 10/06/2019 11:51
To Next Page
Loading...
Need help?
General
