20
Factory Reset
If you want to delete all your stations and settings, you can return your
radio back to the default setting by running a Factory Reset.
1. In ON mode, press the MENU button, and then turn the SCROLL &
SELECT dial to select <System>. Press the SCROLL & SELECT dial to
conrm.
2. Turn the SCROLL & SELECT dial to select <Factory Reset>, and then
press the SCROLL & SELECT dial to conrm.
3. Turn the SCROLL & SELECT dial to select <Yes>, and then press the
SCROLL & SELECT dial to conrm.
After factory reset, all tuned stations, preset stations and alarm
settings will be erased then your radio will switch back on.
Software version
This information may be requested when dealing with technical support
issues.
1. Press the MENU button, and then turn the SCROLL & SELECT dial to
select <System>. Press the SCROLL & SELECT dial to conrm.
2. Turn the SCROLL & SELECT dial to select <SW version>, and then press
the SCROLL & SELECT dial to conrm.
3. The software version will show on the display.
4. Press the MENU button to exit.
Alarm
Ensure the time and date is set before you can activate the alarm
function.
Setting the Alarm
Your radio has two alarms (Alarm 1 and Alarm 2). This is handy so you can
set one alarm for workdays and one for weekends. You set both alarms in
the same way.
1. In ON mode, press Alarm button repeatedly to select Alarm 1 Setup or
Alarm 2 Setup, and then press the SCROLL & SELECT dial to conrm.
2. Turn the SCROLL & SELECT dial to select options, and then press the
SCROLL & SELECT dial to conrm the setting.
SL-DBTB_C_G18_IB_Final190610V2.indd 20 10/06/2019 11:51
To Next Page
Loading...
Need help?
General
