EasyManua.ls Logo

Sandstrom SL-DBTB18 - Safety Warnings; Damage and Location; Moisture and Flames

Sandstrom SL-DBTB18
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
• Read all the instructions carefully
before using the unit and keep
them for future reference.
• Retain the manual. If you pass the
unit onto a third party make sure
to include this manual.
• Check that the voltage marked
on the rating label matches your
mains voltage.
Damage
• Please inspect the unit for
damage after unpacking.
• Do not continue to operate the
unit if you are in any doubt about
it working normally, or if it is
damaged in any way - switch o,
withdraw the mains adapter and
consult your dealer.
Location of Unit
• The unit must be placed on a at
stable surface and not subjected
to vibrations.
• Do not place the unit on sloped
or unstable surfaces as the unit
may fall o or tip over.
• The mains socket must be located
near the unit and should be easily
accessible.
• This unit is designed for indoor
use only.
Temperature
• Avoid extreme degrees of
temperature, either hot or cold.
Safety Warnings
Place the unit well away from
heat sources such as radiators or
gas / electric res.
• Avoid exposure to direct sunlight
and other sources of heat.
Naked Flames
• Never place any type of candle or
naked ame on the top of or near
the unit.
Moisture
• To reduce the risk of re, electric
shock or product damage, do not
expose this unit to rain, moisture,
dripping or splashing. No objects
lled with liquids, such as vases,
should be placed on the unit. Do
not operate the unit with wet
hands, near water or other liquid.
• If you spill any liquid into the
unit, it can cause serious damage.
Switch it o at the mains
immediately. Withdraw the mains
plug and consult your dealer.
Ventilation
• To prevent the risk of electric
shock or re hazard due to
overheating, ensure that curtains
and other materials do not
obstruct the ventilation vents.
• A minimum distance of 5cm
around the unit should be
maintained to allow for sucient
ventilation.
SL-DBTB_C_G18_IB_Final190610V2.indd 5 10/06/2019 11:51