SANLI LBP350 - Spark Plug and Air Filter Service

Sanli LawnBeetle User Guide 11
Basic maintenance made easy.
WARNING! If your mower is not serviced correctly, you could reduce
your mower’s ability to operate and void warranty.
Spark plug.
Firstly, wait until the engine has cooled before
disconnecting the spark plug cover and then
removing the spark plug with the box spanner
supplied.Ifitisdirty,youcancleantheplugwitha
wire brush.
For best results we advise you to replace the spark
plugafter100hoursofuse.Thereplacementspark
plugisNGKBPR6ES.Whenrettingthesparkplug
donotover-tighten.Ifadjustingyourself,notethe
sparkpluggapmustbesetto0.75mm.
Air lter.
Ensuretheengineiscool,unscrewthetopair
lter nut, lift up the cover and remove the air
lter element. Put the cover back on the housing
immediately to prevent any objects falling into the air
intake.
Eithercarefullybrushoffanyexcessdirtparticles,
or replace the air lter with a new one. To protect
your warranty, only use a genuine Sanli air lter.
Werecommendthatyoureplacetheairlterafter
every12monthsofregularusage.Whentheairlter
has been cleaned or replaced, screw-in the cover,
taking care not to over-tighten.