SANLI LBP350 - Setup and Assembly; Handle Assembly; Attach Grass Catcher

6Sanli LawnBeetle User Guide
Assembling the handle.
Insertthelowerhandlearmsinto
the holes located at the rear of the
cutting deck. Line up the holes in the
handle arms and the cutting deck
and x into place using the nuts and
bolts provided.
The upper handle is xed to the
lower handle using the toggles
provided as shown in gure 2.
Attaching the grass catcher.
The grass catcher attaches easily by lifting the
mower’s rear ap and inserting it.
Just lift the rear ap with one hand and then
locate the catcher onto the lugs provided at the
rear of the deck.
Figure1.
Figure 2.