7
Standard AHCI Compliant Hot-plug capability
Supports Native Command Queuing (NCQ)
Out-of-the-Box Ready for Windows, Linux and Mac OS X 10.6 and above (Check AHCI detail OS support)
Compatible with SATA (III, II, I) Hard Drives, SSD, et
Support up to 2TB Hard Drives Power Efficient – Going Green Saves Green RoHS compliant
1.4 SPECIFICATIONS
Four 3.5-inch SATA HDDs to a standard B type USB or eSATA interface with door cover.
Power, PC Link, and four HDD LEDs.
Support Clean, Large, Clone, R0, R1, R3, R5, R10 modes.
Metal chassis (SECC) and plastic panel frame (ABS) design.
265 (L) x 135 (W) x 186 (H) mm, NW: 2.4 Kgs, GW: 3.5Kgs.
150 watts power supply, 100 to 132Vac or 200 to 264Vac select switch / 47~63Hz with CE/ FCC/ UL/ CB/ BSMI
requirement. Physical Dimensions: 121 mm (L) x 72 mm (W) x 35 mm (H).
1.5 SYSTEM REQUIREMENTS
1.5.1 PC SYSTEMS
• Intel Pentium-III 500MHz equivalent or faster
• Windows XP, Windows Vista, Windows 7 RC2 with the latest Service Packs
• CD-ROM drive
To Next Page
Loading...
