Sansui HDLCDVD260 - Selecting the video input source;Labeling the video input source; Selecting Video Input Source; Labeling Video Input Sources

25
Selecting the video input source/
Labeling the video input source
Press SETUP/TV MENU in
the TV mode. Then press
or to select
(OPTION) menu.
Press ▲ or ▼ to select
“VIDEO LABEL”.
Press
or . The VIDEO
LABEL menu will appear.
1
2
Press ▲ or ▼ to select the
video source you want to
label.
3
Press or to select the
desired
label for that input
source.
4
– : Uses the default
label name
VCR : Video cassette
recorder
DVD :DVD video
DTV :
Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device (only HDMI)
Press EXIT to return to the normal screen.
Selecting the video input source
Press INPUT SELECT to view a
signal from another device con-
nected to your TV, such as a VCR
or DVD player. You can select ANT,
VIDEO1, VIDEO2, COMPONENT,
HDMI or PC depending on which
input jacks you used to connect
your devices.
Pressing INPUT SELECT on the remote control displays the current
signal source. To change the video input source, press INPUT
SELECT again or 0-5.
Labeling the video input source
The video label feature allows you to label each input source for
your unit.
SOURCE SELECTION
0:ANT
1:VIDEO1
2:VIDEO2
3:COMPONENT
4:HDMI
5:PC
[0
- 5] : SELECT
VIDEO LABEL
1. VIDEO1 - / VCR /DVD/ DTV/SAT/ CBL
2. VIDEO2 -
3. COMPONENT -
4. HDMI -
RETURN
:SELECT
:ADJUST
OPTION
CH LABEL
VIDEO LABEL
:SELECT
:ADJUST
VIDEO LABEL
1. VIDEO1 - / VCR/DVD / DTV/SAT/CBL
2. VIDEO2 -
3. COMPONENT -
4. HDMI -
RETURN
:SELECT
:ADJUST
NOTE:
Select “RETURN” and press
or
to return from VIDEO LABEL menu to
OPTION menu.
50C0301A_EN_P23-28 4/27/07, 7:18 PM25