26
Setting the picture size
NATURAL picture size
In some cases, this image will display the size of standard 4:3
with a black side bar.
2
NOTE:
You can also display the PICTURE SIZE menu by pressing the
SCREEN SIZE button on the remote control.
1
Press SETUP/TV MENU. Press
or to select (SETUP)
menu. Press ▲ or ▼ to select
“PICTURE SIZE”.
Selecting the picture size
Press or . The PICTURE
SIZE menu will appear. Press ▲/
▼ or a Number button (0-4) to
select the desired picture size, as
described below and on the next
page, then press ENTER.
You can view 480i and 480p format
programs in a variety of picture
sizes—NATURAL, CINEMA
WIDE1, CINEMA WIDE2, CINEMA
WIDE3, and FULL.
CINEMA WIDE1 picture size (for 4:3 format programs)
To fill the screen, the right and left edges are extended, however;
the center of the picture remains near its former ratio.
The top and bottom edges of the picture may be hidden.
3
Press EXIT to return to the normal screen.
PICTURE SIZE
0:NATURAL
1:CINEMA WIDE1
2:CINEMA WIDE2
3:CINEMA WIDE3
4:FULL
[0-4] : SELECT
:SELECT
:ADJUST
SETUP
PICTURE SIZE
PICTURE SCROLL
CINEMA MODE FILM
ASPECT OFF
SIGNAL METER
AUTO SHUT OFF OFF
NOTE:
Some High Definition and/or Digital
broadcasts may not allow you to
change the picture size.
50C0301A_EN_P23-28 4/27/07, 7:18 PM26
To Next Page
Loading...
