∆-∑ method
Average value method
4000 counts
Approx. 3 times/sec.
Auto and Manual (Some with Manual only or Auto only)
“OL” shown in numerical part. (1000V DC/AC, 10A excluded.)
“–” indicated only when negative input.
Battery (0000) mark lights or flickers at approx.
2.4 V or below.
Altitude 2000 m or below, pollution degree II.
5°C to 40°C and humidity range as follows. No condensation allowed.
At 5°C to 31°C, 80% RH (max). At 31°C to 40°C, linear drop from
80% RH to 50% RH.
–10°C 40°C, 80%RH max., no condensation
40°C 50 °C, 70%RH max., no condensation
(When the meter will not be used for a long time, remove the batteries before storage.)
SUM–3 (R6), 2 pieces
About 400 hours continuously at DCV. (Auto power off canceled)
Power off about 30 minutes after no operation.
0.5A/1000V, Breaking capacity 30kA
10A/1000V, Breaking capacity 30kA
IEC61010-1 CAT.III 600V CAT.II 1000V
IEC61010-031 : 2008
IEC61326
166(L) X 82(W) X 44(D) mm (Projections not included)
Approx. 360 g (batteries included)
Typical 4.5mW (at DCV)
Test lead (TL-23a), Instruction manual
Alligator clip: CL-11, CL-15, TL-8IC
Clamp probe: CL-22AD, CL-33DC, CL-20D
High voltage probe: HV-60
Carrying case: C-77, C77H
Operation method
AC measuring method
LCD
Sampling rate
Range selection
Over-range indication
Polarity indication automatic
selection
Battery low warning
Environmental condition
Operating temperature /
humidity
Storage temperature /
humidity
Power supply
Battery life
Auto power off
Fuse
Safety standards
EMC Directive
Dimensions
Weight
Power consumption
Standard accessaries included
Optional accessaries
To Next Page
Loading...
