2) Installation to TOYOTA/NISSAN Vehicles
Install the unit using the existing TOYOTA/NISSAN Mounting Bracket and Screws Use the mounting holes
in the unit chassis ‘7” or “N” is engraved next to each mounting hole Use 7” holes for Toyota vehicles and
“N” holes for Nissan vehicles
TOYOTA/NISSAN
Screw
ONLY USE M8 x 6 SCREW (IN-
CLUDED WITH THIS UNIT) AS
ILLUSTRATED ABOVE USE
OF ANY OTHER SCREW OR
HARDWARE MAY RESULT
DAMAGE TO HEAD UNIT
-7!i-
To Next Page
Loading...
