44
How to reverse the door
1. Unplug the unit and ensure the power is not supplied.
Remove the rear panel.
2. Take the inner and outer door off.
(1) Take out power panel which is at the front.(4screws)
(2) Pull out the inner door hinge pin (2pcs), take the
inner door off.
(3) Remove the connecter (2pcs) of the door lead wire,
earth wire and nylon clip. Remove the bushing for
door lead wire outlet and take the lead wire out.
(4) Remove the outer door hinge cap. (4screws)
(5) Remove 8pcs of outer door hinge screw and take
the outer door off.
㩷㩷㩷㩷㩷㩷㩷Do not miss the attachment plate for outer
door hinge.
3. Preparation to reverse the door
(1) Remove the cover of outer door bottom, and pull the lead wire out to the opposite side and
put the cover back on.
(2) Place the outer door hinge and the cap to the opposite side.
㩷㩷㩷㩷㩷㩷㩷Outer door hinge screw fastening torque = more than 80kgf/cm
Note
Note
To Next Page
Loading...
