Sanyo MCO-5M - Structural Specification

2
Structural specification
Name Multi gas incubator
Model MCO-5M
External dimensions W 480 x D 548 x H 575 (mm)
Internal dimensions W 350 x D 378 x H 375 (mm)
Interior volume 49 L
Exterior Acrylic finish baked on zinc galvanized steel
Interior Stainless steel containing copper (R corner structure)
Insulation Rigid polyurethane foamed-in place (CFC-FREE)
Outer door
Acrylic finish baked on zinc galvanized steel,
Reversible support (selectable right or left-hand door)
Inner door Tempered glass (thickness 5mm)
Tray
Stainless steel containing copper
Standard 3 trays (maximum 6 trays) available
W310 x D310 x H12 (mm), Maximum load: 4kg/tray
Access port
㱢30mm x 1, on the back side
Accessories
Power supply cord, 3 trays, 3 gas tube, 1 humidifying pan,
Stacking plate A & B, 4 protective stickers, 6 tube bands,
1 injection nozzle, 1 injection nozzle tube
Weight 50 kg
Optional accessory
Self-contained CO
2
cylinder changeover system (MCO-5GC)
Extra tray (MCO-30ST), UV system kit (MCO-18UVS2),
Roller base (MCO-5RB), CO
2
cylinder regulator (MCO-100L)
Parts for Antibacterial stainless steel䋺
䂾㩷 Inner cabinet
䂾㩷 Trays
䂾㩷 Tray support (right & left)
䂾㩷 Duct
䂾㩷 Humidifying pan cover
㶎The humidifying pan is not made of stainless steel containing copper.