Sanyo MDF-U730

ENVIRONMENTAL CONDITIONS
This equipment is designed to be safe at least under the following conditions (based on the IEC 1010-1):
1. Indoor use;
2. Altitude up to 2000 m;
3. Ambient temperature 5°C to 35°C
4. Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% relative
humidity at 35°C;
5. Mains supply voltage fluctuations not to exceed +10% of the nominal voltage;
6. Other supply voltage fluctuations as stated by the manufacturer;
7. Transient over voltages according to Installation Categories (Over voltage Categories) II; For mains
supply the minimum and normal category is II;
8. Pollution degree 2 in accordance with IEC 664.
-18-